Single-phase inverter type DXS

Basic use: conversion of DC battery voltage into AC voltage

 

TECHNICAL DATA
input voltage DC 24V – 48V – 110V – 220V, +20%/-15%
output voltage AC 230V ±1%, 50Hz
rated power 0,1kVA – 0,5kVA
frequency change ±0,1% for independent work
waveform sine, THD<4% at linear load
dynamic accuracy at 100% load change ±6% through 1 ms
overload 100% through 5 seconds
efficiency 0,86 – 0,91 at rated conditions, depending on the input voltage and output current
cooling natural
protection output short-circuit - electronic
overload-electronic
battery deep discharge
level of mechanical protection IP 20
dimension 200 x 90 x 230 mm for 0,1kVA
250 x 127 x 300 mm for 0,5kVA
environment working temperature 0°C to +40°C
dxs

 

Sigle phase inverter/rectifier/DC-DC converter type:
DXS 48-03B

Device converts 230AC voltage or 48 DC battery voltage into 24VDC or 230VAC. Also can work as 48VDC/24VDC converter.

 

TECHNICAL DATA
input voltage DC 48V or AC 230V (+20%/-15%)
output voltage AC 230V 50Hz (±1,5%) or DC 24V
rated power 0,3kVA
frequency change ±0,1% for independent work
waveform sine, THD<4% at linear load
dynamic accuracy at 100% load change ±6% through 1 ms
overload 100% through 30 seconds
efficiency 0,86 – 0,91 at rated conditions, depending on the input voltage and output current
cooling natural
protection output short-circuit - electronic
overload –electronic
battery deep discharge
level of mechanical protection IP 20
enviroment working temperature od 0°C to +40°C
dimension: 245 x 120 x 255 mm
weight (kg) 6 kg

 

DXS48-03B

This inveter type is not using grid power in case too deep battery discharge.